Tutorials
Go through our tutorials to learn how to use AugmentedPro in a few clicks.
29
Camera calibration
Learn how to go through the camera calibration procedure with AugmentedPro Player. Camera calibration parameters are required to display 3D information in augmented reality, for a planar image reference as well as for a CAD model reference.
Read
13
Texture tracking
Learn how to create an AugmentedPro project with a 3D visual displayed in augmented reality relative to a textured image reference. This tutorial will guide you to create a simple project in AugmentedPro Creator and play it AugmentedPro Player.
Read
15
CAD model tracking
Learn how to create an AugmentedPro project with a 3D visual displayed in augmented reality relative to a CAD model reference. This tutorial will guide you to create a simple project in AugmentedPro Creator and play it AugmentedPro Player.
Read

FAQ
Please check out the answers to most of your questions below. If you still don't have the answer to your question, please Contact us !
How can I test AugmentedPro Player ?
Download AugmentedPro Player, install it on your Windows PC or on a Windows tablet and run it. An AugmentedPro example application is available in the starting page of AugmentedPro Player. This example includes 2 simple steps with augmented reality information displayed for the maintenance of an engine. Download the reference image to use for this example here and print it.
Make sure that your device has an internal camera or an external USB camera, run the AugmentedPro Player example application and click on the first screen. Your camera should open and augmented reality information should appear for the 2 steps when pointing at the printed reference image. This example can be played with no time restriction.
How can I test AugmentedPro Creator ?
Download AugmentedPro Creator, install it on your Windows PC and run it. Select New Project, select an existing device for your project or define a new one, and start your new project. A first screen is already defined. You can insert content in your screen through the Insert menu.
When your project is ready, click on the Export button in the File menu, an .app file will be saved on your disk, ready to be played by AugmentedPro Player. You can also open the Engine example from the starting page. AugmentedPro Creator is free with no time restriction.
How can I design a screen with augmented reality information in AugmentedPro Creator ?
When the active tab is a screen, a click on the Augmentation button in the Insert menu creates a camera stream area in the active screen tab, a beacon in the Libraries section and an empty augmentation attached to the beacon.
When clicking on the Augmentation button from an active screen tab, a trackable first has to be selected in a file explorer dialog. After selecting the trackable, the augmentation tab appears with only the trackable displayed. Visual elements to be displayed in augmented reality have to be inserted in the augmentation container and positioned relative to the trackable.
What is the difference between a beacon and a trackable ?
Screens, reports, and libraries sections all have container objects that can be opened as a tab in the center section of the application. Containers have elements that are listed in the Elements section.
A beacon is a container that only has one element, which is the trackable. The trackable is the reference object that is tracked by AugmentedPro Player to enable augmented reality features. The trackable can be a textured image or a 3D model.
What is the difference between an augmentation and a detection ?
The augmentation is a container that includes the trackable and also the elements displayed in augmented reality when the tracking succeeds. The elements displayed in augmented reality can be images or 3d models for a 3D augmentation, and only images for a 2D augmentation. When an augmentation is first created, there is no augmented reality element included, only the trackable appears on screen. You should then insert elements to display in augmented reality through the Insert menu.
A detection is a container that includes the trackable like an augmentation, but no elements can be displayed. The detection is meant to define a transition to another screen or to a report when the trackable is detected. You can define this transition in the Interactions section on the left pane of the application.
Augmentations and detections both have a parent beacon that holds a common trackable for all its augmentations and detections children. Augmentations and detections can both be added to a screen either through drag and drop of the augmentation entry of the Libraries section or through a right click on the same entry. First open the screen tab where you would like to add the augmentation or detection, then add it through drag and drop or right click. If a camera stream is already defined in your screen, the augmentation or detection is added to the existing camera stream, else a camera stream is automatically created in your screen.
What is a 2D augmentation ?
When an augmentation with a texture trackable only contains images as augmented reality elements, the 2D property is available in the properties pane of the augmentation. When checking the 2D property, the augmentation tab switches in a 2D view, which is easier to use for the positioning of images on the trackable plane.
The Z coordinate of the augmented reality elements is not reset to 0 though for elements that have previously been positioned in the 3D space. If you want your augmented reality elements to be displayed on the trackable plane, make sure that their Z coordinate is set to 0.
What is the default camera ?
All the devices defined in AugmentedPro Creator has a default camera that can be selected in a camera stream. You can use the default camera when you do not know the target device, the camera selected in the Camera tab of the Settings section of AugmentedPro Player will be used when playing the project. The default camera can only be used for 2D augmentations though, since 3D augmentations require the camera calibration parameters to be known when exporting the project from AugmentedPro Creator.
To create an augmentation with the default camera, insert a camera stream in a screen, select 'Default Camera' as associated camera in the properties pane of the camera stream, and insert an augmentation.